Psion Teklogix PowerScan M8300 Instrukcja Użytkownika Pobierz pdf (Strona 42)

CONFIGURATION

4.1.3 Copy Command

A previously configured device (Master), can be used to send its configuration directly

to other devices of the same type (Slaves). The particular procedure for each device is

given in section 5.14.

4.1.4 Sending Configuration Strings from Host

An alternative configuration method is provided in Appendix A using the RS-232

interface. This method is particularly useful when many devices need to be

configured with the same settings. Batch files containing the desired parameter

settings can be prepared to configure devices quickly and easily.

4.2 SETUP PROCEDURES

For PowerScan

D8330 Series readers, follow the setup procedures in sections 4.3,

and 4.8.

For PowerScan

M8300 Series readers, the setup procedures depend on two basic

applications, Stand-alone or STAR-System™.

Stand-alone applications allow communication with the Host by either the BC-80X0

cradle (section 4.5), or by the STAR-Modem™ radio modem (section 4.5.2).

STAR-System™ applications allow communication with the Host through an

RS-485 network by the STARGATE™ RF base station or by the BC-8000 cradle

(sections 4.6 and 4.7).

Proceed as shown in the following diagram:

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 219 220

Brak uwag

Psion Teklogix PowerScan M8300 Instrukcja Użytkownika Strona 42