Psion Teklogix Win CE 4.2 Instrukcja Użytkownika Strona 175

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 174
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 149
Chapter 8: Peripheral Devices & Accessories
Inserting A Battery In The Single Battery Charger
8.5.1 Inserting A Battery In The Single Battery Charger
Insert the DC power plug into the charger. Plug the pronged end of the
power cable into an AC outlet.
Install the battery, aligning the contacts on the battery with the contacts in
the battery charge well.
8.5.2 Battery Charge Duration
It can take up to 4 hours to fully charge a battery. The single battery charger stops
applying power to the battery when it is fully charged – there is no risk of
overcharge if the battery remains in the charge well. The 75% charge indicator is
handy if you need a quick recharge – a quick charge often takes less than one hour.
8.5.3 Charge Indicators – The LED
The LED on the top of the charger indicates battery charge progress.
Table 8.3 Single Battery LED Behaviour
Note: Battery charging continues whether the hand-held is switched on or off.
LED Behaviour Charge Status
Off No battery detected in the charge well.
Solid green Battery is fully charged.
Fast flashing green Battery is charged to 75% capacity.
Slow flashing green Charge in progress.
Solid red
Battery is outside ambient temperature range of
0˚ C to 45 ˚C (32˚ F to 113˚ F).
Flashing red
Charge alarm indicating a charging circuit problem.
Refer to Troubleshooting” on page 151 for details.
Flashing red then green
in a 3 second cycle
Power up test sequence.
Przeglądanie stron 174
1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 215 216

Komentarze do niniejszej Instrukcji

Brak uwag