Psion Teklogix Win CE 4.2 Instrukcja Użytkownika Strona 154

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 153
Chapter 7: Expansion Modules
Installing An SE 1223HP Scanner
128
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Remove the batteries. If your unit is using AC power, disconnect it.
Remove the end-cap at the top of the WORKABOUT PRO.
Slide the SW1401 switch to the left to shut off internal battery power.
With the power shut down, you can install the GSM/GPRS module and the antenna.
Slide the GSM/GPRS radio under the metal frame, and align the
GSM/GPRS connector with the expansion connector on the WORK-
ABOUT PRO. Apply slight pressure to snap the module into place on the
hand-held.
Use the screws provided to secure the module in place.
Fit the antenna at the top of the unit making certain that the antenna
contacts are aligned with the contacts on the GSM/GPRS module.
Use the screws provided to secure the antenna on the metal frame.
Figure 7.7 An Installed GSM/GPRS Module
Slide the SW1401 switch to the right to turn power back on.
Replace the end-cap, back plate and batteries.
7.1.6 Installing An SE 1223HP Scanner
The SE 1223HP scanner is the internal scanner module available with the
WORKABOUT PRO. To install it:
Remove the batteries. If your unit is using AC power, disconnect it.
Przeglądanie stron 153
1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 215 216

Komentarze do niniejszej Instrukcji

Brak uwag