Psion Teklogix netpad Instrukcja Użytkownika Pobierz pdf (Strona 49)

Psion Teklogix netpad Windows CE .NET 4.2 User Manual 23

Chapter 2: Getting Started

Power Properties

2.3.2.4 Battery Settings

This screen allows you to check the current status of the battery and to configure the

battery settings so that the netpad will warn you when the main battery charge is low.

Figure 2.17 Power Properties: Battery Settings

To set the Battery Suspend Threshold, click on the Battery Settings tab. The avail-

able settings are set on a sliding scale, and range from 20 to 70%. The Battery

Suspend Threshold value confirms the setting made on the sliding scale. A warning

message to change or recharge the battery will appear when the main or backup

battery levels become critically low.

The Estimated Operating Time and Estimated Main Battery Backup Time values are

calculated based on current use and the remaining battery charge. These figures will

change, depending on user activity level and type.

2.3.2.5 Device Status

The Device Status tab lists the devices controlled by the power manager, and their

respective power levels (see Figure 2.18 on page 24). The available power levels are

D0 (active), D1 (Dim), D2 (Stand-By), D3 and D4 (Suspend), and Power loss (no

power). The device names are represented as follows:

\Windows\sa_lcd2.dll

Display driver.

NDS0 NDIS driver.

PWR1 Power button, which passively supports power management to

control the system power states.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 229 230

Brak uwag

Psion Teklogix netpad Instrukcja Użytkownika Strona 49