Psion Teklogix netpad Instrukcja Użytkownika Pobierz pdf (Strona 40)

Chapter 2: Getting Started

Power Management

Psion Teklogix netpad Windows CE .NET 4.2 User Manual

2.3 Power Management

The netpad is powered by a Lithium Ion rechargeable battery pack, which under

optimal operating conditions will provide power for a full shift (for details, see “Bat-

tery Life Of The netpad Variants” on page 171). The netpad can be powered from

AC when used in the docking station (see page 43). When the netpad is powered

from the docking station, it will also charge the battery pack.

Note: How long your batteries last will depend upon how you use your netpad.

The netpad will use considerably more battery power when you have the

brightness turned up, are using files stored on a multimedia card, or are

using Infrared.

You can take steps to help prolong your battery’s life:

• Turn the screen brightness down.

• Set the Power Saving Schemes timeouts to the shortest possible length.

Keep in mind that the least amount of power is consumed during the

Suspend state (see page 22).

• Use files on the internal disk instead of an MMC, as the netpad requires

more power to write to the multimedia card.

• Turn Flight Mode ON to conserve power when radio communications or

the PCMCIA card are not needed (see “Flight Mode Settings” on

page 24).

2.3.1 Battery Care

2.3.1.1 Fitting The Battery

Before you can use the netpad you must fit the battery—slide it into place until it

clicks, as shown in Figure 2.7 on page 15.

Important: Always switch off the netpad before removing the main battery.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 229 230

Brak uwag

Psion Teklogix netpad Instrukcja Użytkownika Strona 40