Psion Teklogix 9160 G2 Instrukcja Użytkownika Pobierz pdf (Strona 165)

Chapter 12: The Ethernet (Wired) Interface

Internal Interface Settings

Psion Teklogix 9160 G2 Wireless Gateway User Manual 141

Table 12.5 Ethernet Settings For Internal LAN

Field Description

MAC Address

Shows the

MAC

address for the Internal interface for the Ethernet port on this access point. This is a read-

only field that you cannot change.

VLAN ID

If you choose to configure Internal and Guest networks by “VLANs”, this field will be

enabled

Provide a number between 1 and 4094 for the Internal VLAN.

This will cause the access point to send DHCP requests with the VLAN tag. The switch and the DHCP

server must support

VLAN

IEEE

802.1p

frames. The access point must be able to reach the DHCP

server.

Check with the Administrator regarding the VLAN and DHCP configurations.

Management

VLAN ID

If you have enabled VWNs or Guest access via VLAN, this field will be enabled.

Enter a value for the Management VLAN ID. This ID can be any value between 1 and 4094.

The Management VLAN ID enables you to specify the VLAN used for managing the AP. You can then

manage the AP via the Web User Interface, the Command Line Interface, and SNMP using this VLAN.

If the Connection Type is set to DHCP, this will cause the access point to send DHCP requests with the

VLAN tag. The switch and the DHCP server must support VLAN IEEE 802.1Q frames. The access point

must be able to reach the DHCP server.

There are no restrictions on the Management VLAN ID you specify. The Management VLAN ID can be the

same as the Internal VLAN ID, the Guest VLAN ID, a VWN VLAN ID, or the Untagged VLAN ID.

Untagged VLAN

If you have enabled VWNs or Guest access via VLAN, you can enable or disable untagged VLANs.

Select

Enabled

to enable Untagged VLAN.

Select

Disabled

to disable Untagged VLAN.

If Untagged VLAN is enabled, then any packets received without a VLAN tag will be treated as if they were

received with the specified Untagged VLAN ID.

If Untagged VLAN is disabled, then any packets received without a VLAN tag are bridged to WDS links, but

not otherwise used by the AP.

Untagged VLAN

If you have enabled Untagged VLAN, this field will be enabled.

Enter a value for the Untagged VLAN ID. This can be any value between 1 and 4094.

There are no restrictions on the Untagged VLAN ID you specify. The Untagged VLAN ID can be the same

as the Internal VLAN ID, the Guest VLAN ID, a VWN VLAN ID, or the Management VLAN ID.

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 435 436

Komentarze do niniejszej Instrukcji

Brak uwag

Psion Teklogix 9160 G2 Instrukcja Użytkownika Strona 165

Komentarze do niniejszej Instrukcji